Planning a tile structure properly can help in the process of preparation, placement, to determine what equipment is needed. Imperfect planning certainly will not produce perfect results.

Have a good plan

To achieve perfect results, you have to plan every detail. Do you want a shower, bathtub, or even both? With the design white bathroom tiles Or nature’s stone floors? Everything must be planned at the beginning. Also, make sure electricity which will be used were neatly arranged behind the bathroom wall. Other details such as medicine cabinet, mirrored lamps in the bathroom, etc. must be prepared early.

Re-check the tile size

 The biggest mistake that often happens is to choose the wrong tile size. You should buy a sample tile and try to put it in your bathroom, Then soak the tile in water to ensure quality. Sometimes to install a bathroom floor, tiles must be cut to fill the gap between the wall and floor. 

Be careful when installing tiles near windows and doors

The tile structure near the window and the door is essential to be noticed. It’s a little hard to apply the Waterproof system to the tile near the door or window. Make sure the waterproof system applied in your bathroom has been properly designed So that you can prevent water from entering the tile or the window frame.

Anti-leak shield

Create a tile divider between the shower room and the dry bathroom. With an extra tile composition arranged around the shower glass door separator and dry area can be Tips for you to avoid running water into dry areas.

Make a good waterways

The placement of plumbing in the bathroom needs great care and proper planning. When you have located the waterways that you want, Experiment with large amounts of water in the bathroom so you can see if your waterways are working properly.